[Titanaircraft] Re: strobe lights installation

Hi Vivian,
Using pvc 1/2 pipe, sounds like a good idea.
I will try that.
Thanks for the tip.
Denys

--- In Titanaircraft@yahoogroups.com, <vivianyeisley@...> wrote:
>
> Hello Denys,
>
> A way I have seen it done, was to obtain an appropriate length of 1/2 or 3/4 ID PVC pipe, install that through the rib lightening holes and secure it with ties. Check that the PIPE DOES NOT INTERFERE with any controls
>
> Then route the wires through the PVC Pipe and secure as needed at the exit points. The weight of the PVC Pipes is very small, and the security it offers the wire is very, very good.
>
> I am sure that this is one idea, and that there will be many more.
>
> vivian (skip) f yeisley jr
>
> ---- cloutier41 <cloutier41@...> wrote:
>
> =============
> Hi all,
> I recently purchased a strobe lights kit to fit on the wing tips of my 23 1/2 wing.
> If anyone has done the job, where and how did you routed the wires through the wing?
> Thanks for your help.
> Denys
>

------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Titanaircraft/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:
http://groups.yahoo.com/group/Titanaircraft/join
(Yahoo! ID required)

<*> To change settings via email:
mailto:Titanaircraft-digest@yahoogroups.com
mailto:Titanaircraft-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
Titanaircraft-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/