It depends if the wing is finished or not. If not, it lays in the hat spar with an entry hole near the center of the wing. If so, you'll want small and very light PVC tubing. Even so, you'll have to get it around wing linkages, which won't be easy, then you have to secure it to a few places throughout the wing so it does't rattle against anything -- especially the ribs. If it does rattle, you'll be in for a short sometime in the future when the ribs saw through it.
--Kimberly
----- Original Message -----
From: cloutier41
To: Titanaircraft@yahoogroups.com
Sent: Thursday, August 27, 2009 7:30 PM
Subject: [Titanaircraft] strobe lights installation
Hi all,
I recently purchased a strobe lights kit to fit on the wing tips of my 23 1/2 wing.
If anyone has done the job, where and how did you routed the wires through the wing?
Thanks for your help.
Denys
[Non-text portions of this message have been removed]
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Titanaircraft/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/Titanaircraft/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:Titanaircraft-digest@yahoogroups.com
mailto:Titanaircraft-fullfeatured@yahoogroups.com
<*> To unsubscribe from this group, send an email to:
Titanaircraft-unsubscribe@yahoogroups.com
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
No comments:
Post a Comment