[Titanaircraft] Re: weldment cracking that holds rudder shaft into boom tube

You could test the area with the dye penetrant/developer method to
confirm whether it's cracked or not.

http://www.amazon.com/Crack-Finder-Dye-Penetrant-Aerosol/dp/B002YOPGGI

If you haven't already done so you might contact the factory and see
what they recommend as a repair to the area after you have confirmed
that it is cracked.

Dale
N28YD

--- In Titanaircraft@yahoogroups.com, "titjab" <brianasagi@...> wrote:

> I stripped the paint off with sand paper, I really can not tell if
> it is cracked or not. On the safe side I have someone coming out to
> tig weld it tomorrow. <SNIP>

------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Titanaircraft/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:
http://groups.yahoo.com/group/Titanaircraft/join
(Yahoo! ID required)

<*> To change settings via email:
Titanaircraft-digest@yahoogroups.com
Titanaircraft-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
Titanaircraft-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/