After a recent post regarding cracks in the vertical stabilizer, I decided to take a look at mine. Sure enough, there are three of them! All on the right side. There are two at the vertical stiffener, one on either side of the rivet line. The front one is about 1 inch long and the other is about 1/2 inch long. Both are 1 1/2 inches above the bottom of the stabilizer and are horizontal. The rearmost one is about an inch long and is located about 4 inches ahead of the rear of the stab., also horizontal at 1 1/2 inches from the bottom of the stab. I don't know how long they have been there but the plane has only about 160 hours on it. I sure would appreciate some advice on how to fix these because I don't want to have to test my parachute.
Tim Hansen
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Titanaircraft/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/Titanaircraft/join
(Yahoo! ID required)
<*> To change settings via email:
Titanaircraft-digest@yahoogroups.com
Titanaircraft-fullfeatured@yahoogroups.com
<*> To unsubscribe from this group, send an email to:
Titanaircraft-unsubscribe@yahoogroups.com
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
No comments:
Post a Comment