Re: [Titanaircraft] Pushing/moving Tornado in-and-out

I've always pushed backwards by pressing down with one hand at the end
of the nose cone, about 6" back from the tip until the tailwheel lifts
and then I maneuver it on two wheels.

To push forwards, I lift by the top of the rudder until the nosewheel
contacts and use it to steer the nosewheel as I push forward.

sunzalito wrote:
>
>
> Hello all,
>
> I have my Tornado based on a grass strip, the hangar floor is not
> finished, only gravel, so it is very difficult to maneuver the plane
> moving/pushing it in and out of the Hangar.
> Any jigs or ideas how to move it easier over gravel?
> Can people push it from the nose cone or other areas?
> That's another concern, try not to push/pull at problematic places.
>
> I thought about design/make some sort of a wheel-stand in the tail..
>
> Thanks,
> Rob.
>
>

[Non-text portions of this message have been removed]

------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Titanaircraft/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:
http://groups.yahoo.com/group/Titanaircraft/join
(Yahoo! ID required)

<*> To change settings via email:
Titanaircraft-digest@yahoogroups.com
Titanaircraft-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
Titanaircraft-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/